Release agents matched to your alloy, your parts and your machine — from 280 t to 3,200 t. Start with your problem, not our catalog. Answer three questions and see where to begin.
Every plant is different. Start from the part you cast, not from a product list.
Clutch and transmission housings, 1,200–3,200 t. Heavy-duty grade, longer die cleaning intervals.
High-temperature, high-demand aluminium parts. Premium grade positioned against imported brands.
Ultra-thin walls, fast cycles, surface-critical. Program target: reject rate down ~75%.
Sanitary ware and hardware. No silicone carry-over into the plating line.
Magnesium-specific chemistry. Field result: yield 82% → 95%.
Small and medium zinc parts, 1:100 dilution, clean release and consistent finish.
Water-based, low-residue grades for gigacasting-scale parts and downstream surface treatment.
Send a part photo and your machine tonnage — we reply with a recommended grade and dilution.
One line, one change: a heavy-duty release agent on deep-cavity automotive parts.
Cleaning interval tripled on a housing line. Fewer stops, less cleaning agent, lower scrap.
Measured after the switch — consumable, cleaning and downtime combined.
Magnesium series with adjusted spray timing. Field case from our process engineer’s track record.
A lower price per kg can still cost more per 1,000 shots. Enter your own invoice price, mixing ratio and spray volume — the calculator shows the real difference.
Practical videos, filmed at the machine — not a corporate film.